Skip to main content
24–48h EU delivery
AutoblowEU
Help & how-to

Autoblow guides & how-to

Setup, video sync, cleaning, sleeves and troubleshooting: clear how-to guides for your Autoblow AI Ultra and VacuGlide 2, from the EU specialist.

Setup & first use

Get your Autoblow online and ready to go in a few minutes.

Features & how to use

Video sync, AI modes, suction and every feature explained.

Autoblow Video Sync: Match Every Scene in Real Time

Autoblow video sync drives the machine from what is playing on screen: strokes speed up, slow down and pause in time with the action. Both the AI Ultra and the VacuGlide 2 support it. A free film library with hundreds of scenes ships with the device, no subscription needed. You can also load your own funscript files for any local video. Getting the timing right is mostly about adjusting the latency offset once, and then you can forget about settings and just enjoy.

Read guide

Autoblow AI Modes: Smarter Sessions Without Fixed Patterns

Autoblow AI modes hand control of the session to the software. Instead of a fixed rhythm that loops the same pattern every few seconds, the AI decides when to slow down, when to build pace and when to hold back. AI companions add a conversational layer: you chat, and the machine responds to what you say. Both the AI Ultra and the VacuGlide 2 support these modes. The result is that two sessions in a row in the same AI mode genuinely feel different from each other.

Read guide

Autoblow Remote Control: Let a Partner Take Over From Anywhere

Autoblow remote control works through the web app: you share your device token with a partner and they connect from wherever they are. There is no distance limit. Your partner can change speed, switch modes, pause and resume the session in real time. You revoke their access just as easily, from the device menu, the moment the session is over.

Read guide

VacuGlide Modes and Speeds: Every Slot Explained

The VacuGlide 2 organises its experience around slots. Each slot combines a stroking pattern and a suction level into one mode you can switch between instantly. The device ships with a set of built-in slots and leaves several empty ones for you to fill with your own combinations. You choose them once, save them, and they are there the next time you switch the machine on.

Read guide

VacuGlide Suction Explained: How the Vacuum Action Works

VacuGlide suction is what separates this machine from a regular stroker. A sealed chamber builds negative pressure around you while the sleeve moves up and down, so you feel both the draw of the vacuum and the physical stroke at the same time. It works with or without a full erection, which makes it genuinely different from anything that relies purely on grip.

Read guide

VacuGlide Vacuum Cap: Compatibility, Fit and Other Strokers

The VacuGlide vacuum cap is a silicone adapter that lets the VacuGlide 2 create a sealed vacuum chamber around almost any stroker you slot into it. The included cap covers the standard opening, and additional cap sizes are available for different anatomies. Getting the fit right is what makes the difference between strong suction and a weak seal.

Read guide

VacuGlide Hose Setup: Length, Comfort and Common Mistakes

The VacuGlide 2 hose connects the vacuum pump unit to the sleeve chamber. Getting the length right matters more than most people expect: too much loose hose and it gets in the way, too little and you lose freedom of movement or put tension on the port. The sweet spot is a gentle loop with no sharp kinks, routed so the hose sits to one side and does not need to be touched once a session starts.

Read guide

Sleeves, mounting & care

Pick the right sleeve, mount hands-free, clean and maintain.

Autoblow Sleeves: How to Choose, Swap and Get the Best Feel

Autoblow AI Ultra sleeves come in three textures: mouth, vagina and butt. Each one changes the tightness and surface feel completely. Swapping takes about ten seconds: pull the sleeve out, rinse it, push a different one in. The guide below covers what each texture actually feels like, how to pick the right one, and how to keep them in good shape.

Read guide

How to Clean Your Autoblow: Sleeves, Machine and Storage

Rinse the sleeve with warm water and mild soap or toy cleaner right after use, wipe the barrel lightly with a damp cloth, and let everything dry completely before storing. The only thing you really need to avoid is getting water into the motor housing at the base. The full process takes about five minutes.

Read guide

Autoblow Sleeve Material Guide: Silicone, Clear Receivers and Rubber

Autoblow machines use two main sleeve materials: body-safe silicone and transparent clear receivers. Silicone sleeves are soft, odour-free, and easy to clean; clear receivers are firmer, transparent, and show a lot more texture detail. Rubber alternatives exist but are harder to sanitise and generally not recommended for regular use. This guide covers how each material feels, how durable it is, how to clean it properly, and which one to choose.

Read guide

Autoblow Hands-Free Mount: Positions and Setup Guide

Getting a stable hands-free mount for your Autoblow comes down to the anchor point, the height, and enough reach to angle the device where you actually need it. A bendable pole clamped to a table or bedframe covers most situations. Both the AI Ultra and the VacuGlide 2 mount the same way, and once the angle is sorted, video sync and VR sessions become a lot more immersive.

Read guide

Choosing your machine

AI Ultra vs VacuGlide 2, and why buying in the EU pays off.

Help & support

Fix common issues and understand your warranty and EU returns.