Autoblow Remote Control: Let a Partner Take Over From Anywhere

The remote control feature is one of the things that sets the Autoblow AI Ultra apart from a regular device, and it is simpler than it sounds.

The short version: your Autoblow connects to the internet (via Wi-Fi), joins the web app, and gets a unique identifier called a device token. You give that token to someone else and they can now control your machine from their own phone or laptop, in the next room or in a completely different country.

There is no dedicated app to install on their side. A browser is enough. And you stay in control of one thing throughout: whether the access is active or not. The moment you want it to stop, you revoke the token and the connection is cut.

Before any of this works, the machine needs to be online. If you have not done that step yet, the online setup guide covers it from scratch.

Simpler than it looks. Here is what you both actually need:

Your side (the person with the device):

• An Autoblow AI Ultra that is charged and switched on
• Your home Wi-Fi connected and active
• Your device token (visible from the device menu; full instructions in the device token guide)
• A way to send that token to your partner: message, email, anything private

Your partner's side:

• Any device with a browser: phone, tablet, laptop, it does not matter
• An internet connection, anywhere in the world
• The token you sent them

No accounts on their side, no app downloads, no subscriptions. The token is the only key, and you hold it.

Once your Autoblow is online and you have your device token, handing control to a partner is three short steps:

1. 1Find or copy your device token. Open the device menu on the Autoblow and navigate to the connection or token section. The token appears as a short alphanumeric code. You can also find it in the web app under your connected device. The device token guide shows exactly where it is on each screen.

1. 1Send the token to your partner. Any method works: a text message, a chat app, email, even reading it aloud over a call. Treat it like a temporary password, because that is essentially what it is.

1. 1Your partner opens the web app and enters the token. They navigate to the Autoblow web app in any browser, find the option to connect or control a remote device, type in the token and confirm. Once they do, they see the control interface and can start adjusting the session.

From that point, control is live. Changes they make happen on your machine in real time.

Your partner's view of the control interface depends slightly on what mode the machine is currently in, but in general they can:

The machine stays physically in your room. Your partner controls it through their browser, wherever they happen to be. If your connection drops mid-session, the device continues at whatever speed was last set until you reconnect or switch it off manually.

Not at all. Everything runs through the internet, so the only thing that matters is that both sides have a working connection.

A partner in the same apartment has the same latency as a partner in another country. Practically speaking, changes they make appear on the machine within a second or two regardless of where they are calling from.

The one thing worth knowing: your Autoblow needs to stay connected to your home Wi-Fi for the session to keep working. The machine communicates via your local network, not through a direct peer-to-peer link to your partner. So if your router has a hiccup, the control link drops temporarily.

For anything above basic remote sessions, you might also be interested in pairing this with video sync, where the machine syncs to what you are both watching. The two features work well together.

The device token gives someone control. Revoking it takes it away. Here is how to end a remote session cleanly:

During a session: Most browsers give your partner a disconnect or end session option in the control interface. Either party can close the connection.

After a session: Go to your device menu and choose to revoke remote access, or regenerate your device token. Regenerating is the more thorough option: it invalidates the old code completely, so even if your partner has it saved somewhere it will not work.

A few things worth doing as a matter of habit:

• Do not leave access open after a session. Revoke or regenerate.
• Share the token through a private channel only, not a group chat or anything that forwards.
• If you are on a shared device, log out of the web app when you are done.

The device ships in a plain, unbranded box with a neutral entry on your bank statement. The remote control architecture keeps the same standard.

Most problems with remote access come down to one of three things:

Your partner entered the token incorrectly. Tokens mix letters and numbers and are easy to misread. Watch for the classic confusions: the letter O versus zero, a lowercase L versus the number one. If in doubt, regenerate the token and share a fresh one.

Your Autoblow went offline. Check that the device is still showing as connected in the web app. If the Wi-Fi dropped, reconnect from the device menu. Your partner may need to re-enter a new token after reconnection.

The web app session timed out. If your partner left the browser idle for a long time, the session may have closed. They can reconnect by entering the token again.

Your partner is using an unusual browser. The web app works on all modern browsers, but very old or niche browsers can cause problems. Chrome, Firefox, Safari and Edge all work fine.

If none of those fixes it, check the online setup guide to confirm the device-side setup is still correct, and reach out to our EU support team if needed. We answer in your language and service everything from inside the EU.